Multi Color Sample Pack - Slim Size Foam - TahoeBay

1 6

Multi Color Sample Pack - Slim Size Foam

Pack Quantity: 12-Pack

12-Pack

25-Pack

50-Pack

Product variants

Number of Packs:

$15.99

Save 0

Sold out

Free Shipping

Amazon Logistics Delivery Estimate: (May vary by item)

Bulk Discounts are automatically applied to your cart
Item out of stock or need it faster? Try our Amazon Store

Important Note:

Multi-color packs arrive with the colors below. We are unable to modify these packs or substitute other colors.

(12-Pack)

Red, Kelly Green, Royal Blue, Bright Orange, Hot Pink, Lime Green, Neon Blue, Yellow, Fuchsia, Purple, Navy Blue, and Texas Orange.

(25-Pack)

Red, Hot Pink, Blush, Coral, Texas Orange, Bright Orange, Gold, Yellow, Lime Green, Mint, Kelly Green, Teal, Robins Egg Blue, Neon Blue, Royal Blue, Navy Blue, Purple, Fuchsia, Chocolate Brown, Khaki, White, Silver, Black, Pink Camo, Camo

(50-Pack)

Two of each color in the 25-pack.

Important: If you absolutely need your order to arrive sooner than 6 business days from the time of your order, we recommend ordering directly from our Amazon Store. Expedited shipping through our website typically delivers within 3-4 business days, but we cannot guarantee it. All of our orders are shipped via Amazon Logistics.

Orders placed on our website are charged the same shipping fee, no matter the size of the order:

Shipping Speed	Order Preparation	Delivery	Fee
Standard*	2 business days	3-7 business days	Free
Expedited	1 business day	2-5 business days	$25

Orders are sometimes split into more than one shipment depending on product availability at Amazon warehouses.

Order preparation times are calculated from the time that an order is placed to when it is shipped from the fulfillment center. Delivery times are calculated from the time that an order is shipped from the fulfillment center to when it is delivered.

*Standard shipping to Alaska, Hawaii, and Puerto Rico will incur a flat fee of $15.

Shipping Times & Information

Orders placed on our website are charged the same shipping fee, no matter the size of the order:

Shipping Speed	Order Preparation	Delivery	Fee
Standard*	2 business days	3-7 business days	Free
Expedited	1 business day	2-5 business days	$25

Orders are sometimes split into more than one shipment depending on product availability at Amazon warehouses.

*Standard shipping to Alaska, Hawaii, and Puerto Rico will incur a flat fee of $15.

We want you to be completely satisfied with your purchase. If for any reason you are not satisfied, our return policy ensures a hassle-free process. Please review the following guidelines to initiate a return:

1. Condition of Items: Items must be returned in new condition to be eligible for a full refund. This includes the original packaging, all accessories, tags, labels, and any promotional materials that were included with the product.

2. Return Period: You have a 30 day period from the date of purchase to initiate a return for a full refund. After this period, refunds may be subject to approval and restocking fees.

3. Proof of Purchase: A valid proof of purchase, such as an order number or receipt, is required to process a return.

4. Return Process: To initiate a return, please contact our customer service team at creative@tahoebay.com. We will guide you through the return process, provide you with a return authorization, and address any questions you may have.

5. Return Shipping: You are responsible for arranging and covering the cost of return shipping. Exceptions may be made for defective items or for unforeseen circumstances at the discretion of our support staff.

6. Inspection and Refund: Once we receive the returned items, our team will inspect them to ensure they are in new condition. Upon successful inspection, we will process a full refund to your original payment method. Refunds may take between 3 and 10 days to process depending on the payment method.

Please note that any items returned in a condition other than new, including signs of wear, damage, or missing components, may result in a partial refund or denial of the return.

We value your satisfaction and strive to provide a smooth return experience. If you have any questions or concerns, please don't hesitate to reach out to our customer service team.

Thank you for your support!

Return Policy

Orders placed on our website are charged the same shipping fee, no matter the size of the order:

Shipping Speed	Order Preparation	Delivery	Fee
Standard*	2 business days	3-7 business days	Free
Expedited	1 business day	2-5 business days	$25

Orders are sometimes split into more than one shipment depending on product availability at Amazon warehouses.

*Standard shipping to Alaska, Hawaii, and Puerto Rico will incur a flat fee of $15.

What are my shipping options?

Orders placed on our website are charged the same shipping fee, no matter the size of the order:

Shipping Speed	Order Preparation	Delivery	Fee
Standard*	2 business days	3-7 business days	Free
Expedited	1 business day	2-5 business days	$25

Orders are sometimes split into more than one shipment depending on product availability at Amazon warehouses.

*Standard shipping to Alaska, Hawaii, and Puerto Rico will incur a flat fee of $15.

Why can't I add the number of packs I want to the shopping cart?

This website limits the number of packs that can be added to a shopping cart based on their availability. Please contact us if you run into this issue.

Instructions for customizing TahoeBay Can Coolers with Heat Transfer Vinyl (HTV), Direct to Film Transfer (DTF), sublimation, and infusible ink. See demonstration videos below.

Heat Transfer Vinyl (HTV) & Direct to Film (DTF) Transfer Instructions

1. Pre-heat your press at the temperature below.
2. Lint roll the can sleeve to remove any lint.
3. Place a cut piece of butcher paper or Teflon inside the can cooler to prevent the sleeve from sticking to itself.
4. Place butcher paper on the top and bottom of the can cooler as a barrier between the sleeve and the press.
5. Pre-heat the can cooler with the press for 10 seconds using the temperature settings below.
6. Place your vinyl graphic in the center of the can cooler and place it back in the press with the butcher paper as before. Follow the temperature and pressure settings below.

*Although vinyl varies slightly by brand, our customers tell us that these settings typically work best:

Using Cricut EasyPress:
30-40 seconds at 310 degrees
Light pressure

Using a commercial press:
15-20 seconds 300 degrees
Light pressure (Ensure the press gap setting is adjusted to allow for the thickness of the sleeve without too much compression.)

Using an iron:
15-20 seconds on Cotton
Light pressure

Troubleshooting tips for vinyl:

Double check that your vinyl is made to adhere to polyester
Use the vinyl manufacturer's temp, time, and pressure recommendations
Try cold peeling (let the vinyl cool before peeling)
Ensure you're pre-heating the iron and can cooler
Press evenly and straight down (if not using a commercial press)
Peel the carrier sheet in one smooth motion
"Set" the vinyl with a second press of ~5 seconds

Sublimation / Infusible Ink Instructions

Note 1: Although many successfully sublimate on our foam can coolers, some prefer our neoprene due to its increased durability under higher temps.

Note 2: Sublimation transfers will not show up well on dark backgrounds. We recommend HTV for our dark can coolers.

Follow steps 1-6 above, with these additions:

Use thermal tape to tape down the sublimation paper to the can cooler.
Ensure your artwork extends beyond the width and height of the can cooler to ensure proper coverage around the edges.
Allow the can cooler to cool prior to pressing the second side.

Using a commercial press:
40-60 seconds at 350 degrees
Light pressure (Ensure the press gap setting is adjusted to allow for the thickness of the can cooler without too much compression.)

Demo Videos Using TahoeBay Can Coolers

Visit our Customer Demos Playlist on YouTube

Transfer Instructions and Demos

Instructions for customizing TahoeBay Can Coolers with Heat Transfer Vinyl (HTV), Direct to Film Transfer (DTF), sublimation, and infusible ink. See demonstration videos below.

Heat Transfer Vinyl (HTV) & Direct to Film (DTF) Transfer Instructions

*Although vinyl varies slightly by brand, our customers tell us that these settings typically work best:

Using Cricut EasyPress:
30-40 seconds at 310 degrees
Light pressure

Using a commercial press:
15-20 seconds 300 degrees
Light pressure (Ensure the press gap setting is adjusted to allow for the thickness of the sleeve without too much compression.)

Using an iron:
15-20 seconds on Cotton
Light pressure

Troubleshooting tips for vinyl:

Double check that your vinyl is made to adhere to polyester
Use the vinyl manufacturer's temp, time, and pressure recommendations
Try cold peeling (let the vinyl cool before peeling)
Ensure you're pre-heating the iron and can cooler
Press evenly and straight down (if not using a commercial press)
Peel the carrier sheet in one smooth motion
"Set" the vinyl with a second press of ~5 seconds

Sublimation / Infusible Ink Instructions

Note 1: Although many successfully sublimate on our foam can coolers, some prefer our neoprene due to its increased durability under higher temps.

Note 2: Sublimation transfers will not show up well on dark backgrounds. We recommend HTV for our dark can coolers.

Follow steps 1-6 above, with these additions:

Use thermal tape to tape down the sublimation paper to the can cooler.
Ensure your artwork extends beyond the width and height of the can cooler to ensure proper coverage around the edges.
Allow the can cooler to cool prior to pressing the second side.

Using a commercial press:
40-60 seconds at 350 degrees
Light pressure (Ensure the press gap setting is adjusted to allow for the thickness of the can cooler without too much compression.)

Demo Videos Using TahoeBay Can Coolers

Visit our Customer Demos Playlist on YouTube

The answer depends on a few factors. Here is a table showing their differences to help you decide what's best for your next project.

The differences:

Foam (Polyfoam)	Neoprene
Softer (think of a soft sponge) Less expensive The seams are sewn using a blind stitch, hiding the thread from the outside of the can cooler	Firmer & more durable wetsuit material More expensive More elastic than foam Sewn with an abutted seam, which shows the thread on the outside Best for higher temperature transfers such as sublimation

What they have in common:

Scuba knit polyester stretch fabric is laminated to the outside of both the foam and neoprene can coolers. This means that both types of coolers will accept Heat Transfer Vinyl (HTV), sublimation, infusible ink and screen printing. However, when applying higher temperatures, such as those with sublimation, many prefer neoprene due to its greater durability.

TahoeBay polyfoam:

Polyfoam comes in a few different grades. One reason creators prefer TahoeBay Foam Can Coolers is that we use a higher grade polyfoam. This makes a difference in softness, keeping its shape during shipping, and holding up under a heat press.

Should I use foam or neoprene can coolers?

The answer depends on a few factors. Here is a table showing their differences to help you decide what's best for your next project.

The differences:

Foam (Polyfoam)	Neoprene
Softer (think of a soft sponge) Less expensive The seams are sewn using a blind stitch, hiding the thread from the outside of the can cooler	Firmer & more durable wetsuit material More expensive More elastic than foam Sewn with an abutted seam, which shows the thread on the outside Best for higher temperature transfers such as sublimation

What they have in common:

TahoeBay polyfoam:

Colors are sometimes difficult to judge on screens. Here are all our colors together to help you decide which is right for your next project.

*Please note that not all colors are available in all pack sizes.

Download Color Chart Here

How to find the right color

Colors are sometimes difficult to judge on screens. Here are all our colors together to help you decide which is right for your next project.

*Please note that not all colors are available in all pack sizes.

Download Color Chart Here

Use our can cooler size templates for outlining your print designs.

HTV and sublimation boundaries are included.

Standard-Size Can Cooler Template

Slim-Size Can Cooler Template

Know your print boundaries with our free can cooler print templates

Use our can cooler size templates for outlining your print designs.

HTV and sublimation boundaries are included.

Standard-Size Can Cooler Template

Slim-Size Can Cooler Template

Display your custom can coolers with personalized hanger inserts! Inserts are great for keeping can coolers flat.

Use the following template files with your printer and paper cutting machine (or hobby knife). We recommend using premium photo paper or card stock that is greater than 60lb. Here is a link to our favorite paper for inserts: HP Premium Plus

Easily print information on areas of the insert that will be visible with the can cooler in place.